This view of the map shows only APRS weather stations. Each one is a home or club weather station that sends wind, temperature, rain, pressure and humidity over APRS. Click a station to see its latest readings.
A weather report on APRS is one short text packet. It usually carries wind direction, average wind speed and gusts, temperature, rainfall for the last hour, the last 24 hours and since midnight, barometric pressure and relative humidity. Some stations add solar radiation or snowfall. A field the station has no sensor for is simply left out, so not every station shows every value. Most stations send a fresh report every 5 to 30 minutes, depending on how the owner set them up.
Every icon on this map is a station that has sent weather data. Click one to see its latest readings in the side panel, then open its station page for the full weather card. The units button switches between metric and imperial. To see every kind of station again, use the filter button on the right or go back to the main map. If your area looks empty, nobody nearby is sending weather over APRS at the moment, or their packets are not reaching the internet.
Most of these are ordinary home weather stations from makers like Davis, Ecowitt or Peet Bros, hooked up to a radio or a computer. Programs such as WeeWX or Cumulus turn the readings into APRS packets. The packets reach the network over RF through digipeaters and iGates, or go straight to APRS-IS over the internet. aprs.world reads the APRS-IS feed and plots each report as it comes in. This is volunteer data from back gardens and rooftops: use it as a local picture, not as an official forecast.
If you already run a weather station at home, a little software is all it takes to get it on APRS. Licensed radio amateurs can send it over RF, or log in to APRS-IS with their callsign and passcode. The weather station guide covers the hardware, the software and what goes into each packet.
How APRS weather stations work · How the APRS-IS passcode works