APRS Guides: From Your First Beacon to Running an iGate

This page answers the questions people actually ask about APRS, in short form. Read the answer you need, then open the full guide underneath it.

Open the live APRS map

What is APRS?

APRS, the Automatic Packet Reporting System, is the amateur radio network in which stations broadcast short packets (position, weather, telemetry, messages) to everyone in range, and iGates carry them onto the worldwide APRS-IS. Bob Bruninga, WB4APR, created it, and the full beginner's guide covers how it works, who uses it and how to get on the air.

What is APRS? Full beginner's guide

How does APRS work?

One transmission is one AX.25 UI frame, sent at 1200 baud over a plain FM channel, with no handshake and no acknowledgement. The frame carries the sender's callsign and SSID, a destination field naming the software or radio that built it, an optional list of relays, and the payload. A position can be sent as readable text or packed into the Mic-E format, which hides part of the coordinates inside the destination field to save airtime. Relaying is the part newcomers underestimate. A path written WIDE1-1,WIDE2-1 asks the first digipeater that hears you, and one more after it, to repeat the packet: two hops, then it stops. A longer path does not extend your reach so much as it occupies everybody else's channel, which is why regional band plans keep the budget small. Somewhere along that chain an iGate hears the packet and forwards it to APRS-IS, the server network carrying the same traffic over the internet.

How APRS digipeaters work · APRS SSID list

What frequency does APRS use?

There is no single worldwide APRS channel, and picking the wrong one is the most common reason a new station is never heard by anybody. Most of Europe, together with Turkey, Russia, much of Africa and the Middle East, uses 144.800 MHz. North America uses 144.390 MHz, which is also the factory default in many radios, so a set taken out of the box in Europe is usually on the wrong channel. Japan runs 144.640 and 144.660 MHz, Australia and New Zealand 145.175 MHz, and several South American countries hold their own allocations. HF is a separate world: 300 baud around 10.147 MHz for paths VHF cannot cover. LoRa APRS, now common for small solar trackers, sits on 433.775 MHz in Europe. A packet sent on the wrong channel reaches no iGate, so it never reaches the internet either. Confirm your national band plan before the first transmission.

APRS frequencies by country

What can you do with APRS?

Position reporting is the obvious use, but the payload is loose enough that operators built much more on top of it. Weather stations publish temperature, wind and rainfall on a fixed cycle. Telemetry channels carry battery voltage, solar current or site status from unattended hilltops. Objects and bulletins let one station place a marker on everybody's map for something that has no radio of its own: a net, an event, a shelter. Short messages travel station to station with an acknowledgement, the one part of APRS that is not fire-and-forget. Satellites and the ISS carry digipeaters that will relay a packet from orbit. Clubs use the same tools for events, putting every marshal vehicle on a marathon or rally course on one shared screen without paying for anything. And every station picks a two-character symbol declaring what it is, which is what turns a screen of dots into cars, boats, balloons and weather stations.

APRS symbols explained

How do you get started with APRS?

Begin by receiving. An RTL-SDR dongle with a soundcard TNC such as Direwolf will decode your local channel in an evening, and APRSdroid on an Android phone does the same over the internet feed with no radio at all. Either one tells you which digipeaters and iGates you can really reach before you spend anything. Transmitting needs an amateur licence and a station that can send packet: a handheld with a built-in TNC, any FM radio behind a hardware or soundcard TNC, or a LoRa tracker. Software that logs in to APRS-IS also asks for a passcode, which is derived from your callsign rather than chosen by you. Then pick an SSID and a symbol that match how you actually operate, and keep the path short. A first beacon nobody hears is nearly always one of three faults: the wrong frequency, an antenna with no path to a digipeater, or a radio still beaconing the default long path.

APRS software compared · What the APRS passcode is · Live APRS map

What Is APRS? Full Form and How It Works

APRS full form: Automatic Packet Reporting System, the ham radio network for GPS position, weather and messages on 144.390 / 144.800 MHz. How it works.

Start Here

Watching APRS

How APRS Works

Radios, Gear & Setup

In the Field

Interactive Tools

Back to the live APRS map